Bostitch PT-2312-3M 1/2-Inch 23-Gauge Headless Pin, 3,000-Pack

Most helpful customer reviews

4 of 4 people found the following review helpful.
Bostitch CS is excellent for the fix
By Remodeling in SoCal
As the pins go,there is no issue. The other reviewer is referring to the tool from Bostitch, the pins can be used in any tool brand using this size.
As far as the Bostitch pinner goes;
There was a problem with the piston /driver that CS will send you a replacement part that will fix the problem I have no issues with the trigger. For the price this is an excellent tool,very well made, works great with the new part.

2 of 2 people found the following review helpful.
Nearly invisible!
By George Gonzalez
These are great for crown molding or holding glued appliques until they dry. But usually the wood fibers don't close up around them again and a tiny hole is still visible, with a shiny metal pin head in it. And if not shot in straight or with enough power they stick out of the wood slightly and you probably won't notice until you get a nasty scratch as you rub your arm against it!
If you have a 23ga pinner with an adjustable piston, set it to a slightly higher pressure than you need to set the pin flush. That way it leaves a tiny pin-sized cavity above the pin head that can be filled and stained without affecting the surrounding finish. That is the way I found works best to make these really disappear.

0 of 0 people found the following review helpful.
Bostitch 23 Gauge pin nailer
By Allan S.

I just completed a large furniture building project that consisted of two 8' x 4' book cases and a cabinet 4'w x 3'h x 22'd. I used the 23 guage pin nailer on all of the frames and on some lattice work on the cabinet doors. The nailer worked great! I'm very happy that I've added it to my toolbox.